teenage girl hair stuck in wheel during selfie

By | October 19, 2016
Advertisement
Sponsors and Advertisements
Sponsors and Advertisements

Occasionally, when laminating things can go wrong and a laminating pouch can get stuck in the machine. This can be very annoying and if not dealt with correctly can damage the document being laminated, the laminator or both. If you own or use a laminator read through the ideas to help resolve a laminating problem if it arises. Watch video link in below

Video link: http://wp.me/p7PtNj-Cw

 

Stop the machine. This will prevent overheating or burning out the motor as well as any further damage to the document.Look carefully at the machine. The most common issue is the item is too thick for the laminator to pass through the rollers. The vast majoring of laminating machings only accept paper or very thin card. The maximim thickness of card that is acceptable will be on the manufacturers intructions on the individual machine that you own. Never go above this, in fact for long life and low maintenance it is alays a safe bet to stay slightly below the recommended maximim thickness. If the item is stuck between the rollers, turn the machine back on and put the rollers into reverse, whilst also pulling gently on the item to remove it from the machine.If the item is paper or very thin card.